Mikrometry instruments limited

CLOSE

CLOSE

Handheld Bottle Cap Torque Tester

Handheld Bottle Cap Torque Tester


Introduction


The device consists of a sturdy mechanical unit with a small rotating knob and an LCD display. The handheld torque tester can test the torque or twisting force while applying and removing the cap from a bottle. The Handheld Bottle Torque Tester is used to check the torque or twisting force while applying and removing the cap from a bottle. It helps to monitor the sealing quality in bottling plants, packaging quality control department etc.


Best for Bottle/Cap Manufacturers, Packaging Quality Control, Preform / Bottle Mould Manufacturers.


This is a handheld bottle cap torque tester that can be used to measure the torque of a variety of caps, including crowns and twists. The device measures the amount of force needed to remove the cap, which is helpful when determining whether your product meets government regulations or customer expectations.

The handheld cap tester measures torque in both Nm (Newton Meters) and ft-lb (foot pounds), making it useful for many different industries. It also comes with an adapter for testing caps that sit flush against the body of the bottle or container.


Handheld Torque Tester is used to check the torque or twisting force while applying and removing the cap from a bottle.


  • Handheld Bottle Cap Torque Tester is used to check the torque or twisting force while applying and removing the cap from a bottle. It is ideal to monitor the sealing quality of caps on bottles, jars and plastic containers.

  • The device consists of a sturdy mechanical unit with a small rotating knob and an LCD display.


The handheld bottle torque tester is ideal to monitor the sealing quality of the cap on bottles, jars and plastic containers.


The Handheld Bottle Cap Torque Tester is a small and easy-to-use device that enables you to test the torque of a cap. The Handheld Bottle Cap Torque Tester can also be used to test the sealing quality of caps, bottles, jars and plastic containers.

The Handheld Bottle Cap Torque Tester will allow you to measure the torque required to remove or reseal any type of screw cap for bottles, jars or plastic containers. The handheld bottle torque tester accurately measures either force (kgf/cm²) or torque (N•m). It has built in auto zero adjust feature which automatically resets itself after each item tested so that multiple measurements can be taken without having to reset up each time.


The device consists of a sturdy mechanical unit with a small rotating knob and an LCD display.


The Handheld Bottle Cap Torque Tester is a portable and easy-to-use device that can be used in a variety of industries. The device consists of a sturdy mechanical unit with a small rotating knob and an LCD display. The Handheld Bottle Cap Torque Tester is easy to use, calibrate and read. It has been designed so that it can be used by anybody who has basic knowledge about measuring devices.

The Handheld Bottle Cap Torque Tester will help you determine the correct torque value for your cap, which in turn helps you make sure your product meets industry standards.


Conclusion


The device consists of a sturdy mechanical unit with a small rotating knob and an LCD display. The adjustable knob can be used to calculate the torque applied by you on the cap. It is used for checking whether or not there is any gap between the cap and bottle. It also helps in calculating the amount of force required to remove or tighten caps onto bottles, jars and plastic containers.










Contact Us

The most accurate measurement results
Meet your various needs!

View More
Latest News From
Mikrometry
Technical Principle of Coating Thickness Meter

Technical Principle of Coating Thickness Meter

Nov 22,2022

How to Use a Force Gauge Safely?

How to Use a Force Gauge Safely?

Nov 15,2022