The real Leeb hardness tester complies with international standards and is interchangeably consistent. Due to the technical problems of the manufacturer, the standard of the Leeb hardness tester is somewhat different. Therefore, the user should pay attention to the characteristics of the real Leeb hardness tester and choose the high-quality product.
(1) The impact device is interchangeable. One host of the Leeb hardness tester can be equipped with seven different types of impact devices at the same time; several impact devices of the same type can be configured on one host.
(2) The punch of the impact device is replaceable. The punch of the impact device of the Leeb hardness tester is replaceable. The punches of the same type of impact device can be replaced with each other without affecting the measured value.
(3) The Leeb hardness tester is not adjustable. The Leeb hardness tester is not adjustable after leaving the factory. When the measured value is inaccurate due to the wear of the ball head, the ball head should be replaced.
(4) The measurement error of the Leeb durometer gauge meets the standard requirements in the full range of hardness. The measurement error of the Leeb hardness tester meets the error requirements specified by the standard in the entire range of hardness from low to high.
Because the current Leeb hardness tester is usually used to measure the hardness value of industrial products, it has become an important instrument for testing whether the product is qualified or not.