Ⅰ. What is a paint thickness gaugeAs far as the construction industry is concerned, the thickness of the paint sprayed on the surface of the material is a very critical factor. So what tool is used t...

Factors That Cause Inaccurate Measurement of Coating Thickness Gauge

09-15-2021

1. The strong magnetic field interferes with the measurement results of the coating thickness meterExperiments have proved that when the coating thickness gauge is working near an electromagnetic fiel...

Characteristics and Categories of Force Metre

09-08-2021

Ⅰ. Features of push pull force gauge:1. Beautiful appearance, small size, easy to carry, the dynamometer has high precision and high resolution.2. Digital display, no parallax. Four measurement units...

EST-FG2 Manual Force Measurement Test Stand

Name: EST-FG2 Manual Force Measurement Test Stand
Brand: Mikrometry instruments limited

The test stand EST-FG2V/H is a electric motor test stand. It has a built-in DC motor, displacement measurement device, good load stability, wide application range; wide bench test speed, high accuracy; manual control, displacement cycle, and force value cycle functions. The manual test stand can be connected with a dynamometer to measure the force value and displacement, which is suitable for various industries such as push-pull load, plug-in force, fatigue test, and destruction test.

Features of EST-FG2 Manual Force Measurement Test Stand

Motorized driving.

Rugged construction

Capacity Up to 650 N (140 lbf,65kgf)

Multiple operation modes

Three-stage programmable cycle

Teaching & Playback programming

Force gauge data integration

USB connection to PC

Multiple limit protection functions

Specification of EST-FG2 Manual Force Measurement Test Stand

Capacity	650N (65KG, 140lbf)
Stroke	220 mm
Speed	Adjustable Range: 30~720 mm/min Resolution:0.1 mm/min Accuracy: ±1 mm/min
Displacement	Resolution: 0.01 mm Accuracy: ± 0.2mm/min
Operation Mode	Manual, Cycle, Demo, Locating Mode
Protection Functions	Position Limit Force Limit (connected to force gauge) Locked rotor. Power Protection
Cycle Program	Three-stage cycle Displacement-based (D-cycle) Force-based(F-cycle)
Outputs	USB-B(connect to PC) RS232 outputs Set point output, RS232(connect with force gauge)
Operating Environment	0 to 40℃,20 to 80% RH
Power Supply	AC100~240V,1A
Dimensions	630 x 320 x 180 mm(EST-FG2V) 640 x 125 x 278 mm(EST-FG2H)
Weight	Approx. 13kg